-
Acrylic PTFE Packing is braided from high strength acrylic synthetic yarns with PTFE impregnated twice. The Acrylic PTFE packing has excellent properties of tightness, lubricity, and good resistance to chemicals. Wide variety of uses throughout a plant. Used in pumps and valves, it can handle most chemicals except strong acid, strong alkali, and a strong oxidizer. Especially for the condition of middle temperature, high pressure, high speed, and where contamination is not permitted. -
Aramid PTFE Packing braided from high-quality Dupont Aramid /Kevlar yarns which are uniformly impregnated with PTFE dispersion. The packing shows good chemical resistance, high elasticity, and very low cold flow. It is wear-resistant but may damage the shaft if not used properly. The aramid fiber can be braided in many types for different applications, such as Aramid PTFE Packing with lubricant for a slurry service application, Spun aramid fiber packing with economical use; PTFE packing with Aramid corner, Graphite PTFE Packing with Aramid Corner, GPTFE & Aramid in Zebra braided packing, etc. -
Carbonized fiber packing is braided from oxidized PAN fiber impregnated with PTFE, silicon-oil-free. Compared with traditional carbonized fiber packing, it is not brittle and suitable for high peripheral speed applications. With the high strength and good thermal conductivity of the PAN fiber, and excellent self-lubrication of the PTFE, the packing has a long life and does not damage shafts. The related carbon fiber packing for a different purpose is available, such as Carbonized fiber packing with graphite, Carbonized Fiber Packing Reinforced with Nickel wire, Carbon fiber packing. -
Ceramic Fiber Cloth is a woven fabric made of our high quality ceramic fiber yarns. It can be used for high temperature applications up to1000° C. The cloth is reinforced with fiberglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperatures and does not affect the insulation property. -
Ceramic fiber braided packing rope is made from high-quality ceramic fiber, it has excellent capabilities of high strength and high-temperature resistance. Ceramic fiber is a standout among the different organic and inorganic fibers as an ideal replacement of asbestos, it has excellent capabilities of high strength and high-temperature resistance. Ceramic Fiber Packing can be impregnated with graphite or insert with steel wire -
Ceramic fiber rope includes three types: twisted, round braided and square braided. All are made of our high-quality ceramic fiber yarns. They can be used for high-temperature applications up to 1000° C. The rope is reinforced with fibreglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperatures and does not affect the insulation property. -
Ceramic Fiber Tape is a woven tape made of our high-quality ceramic fiber yarns. It can be used for high-temperature applications up to 1000°C. The tape is reinforced with fibreglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperatures and does not affect the insulation property. -
The corrugated metal gaskets can be direct replacements for spiral wound gaskets. It can eliminate inward buckling issues while creating a seal at moderate flange stresses. Corrugated metal is covered with graphite, ceramic, or PTFE layer. An additional finishing layer is applied depending on the requirements of the medium to be sealed. The gaskets with a soft layer on both sides are used in low-pressure applications in large diameter flue gas ducts at high temperatures -
Double Jacketed Gasket is made from graphite, ceramic, non-asbestos, etc filler covered with a thin metal jacket, such as SUS304, SUS316, Carbon steel, copper, soft iron, etc. With excellent sealing performance, it can be used in sealing spots of pressure vessels, exchanger heat, condenser, plain hole, etc. -
Graphite packing is braided from low-sulfur expanded graphite yarns, which are reinforced by cotton, carbon fiber, glass fiber, etc. It has very low friction, does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticity. To improve mechanical strength, Graphite packing can be reinforced with Inconel wire, ss wire, nickel wire, etc metal materials. -
Expanded PTFE Gasket is cut from Expanded PTFE gasket sheet, our expanded PTFE gasket sheet made with only pure PTFE resins. It is suitable for use in steel flanges as well as flanges where a highly compressible gasket is required. Expanded PTFE Gasket is also suitable for sealing flanges with irregular surfaces. It will not exhibit the cold flow problems associated with virgin PTFE or the hardness problems of some other filled PTFE products. It has excellent sealability, cuts easily, and separates cleanly from flanges after use -
Expanded PTFE joint sealant tape is a new soft ePTFE tape gasket product made of 100% PTFE. which is developed by using a highly specific treatment on the PTFE Fluorocarbon material. The Expanded PTFE Joint Sealant Tape is a form-in-place gasket, with its exceptional performance characteristics, pure material composition, and versatility, serves as an ideal sealing solution across various industries. Its adaptability and ease of use contribute to its pivotal role in diverse applications, making it a reliable choice for sealing requirements in different industrial settings The Expanded PTFE Joint Sealant Tape is supplied with a self-adhesive backing for easy fitting.
