-
Acrylic PTFE Packing is braided from high strength acrylic synthetic yarns with PTFE impregnated twice. The Acrylic PTFE packing has excellent properties of tightness, lubricity, and good resistance to chemicals. Wide variety of uses throughout a plant. Used in pumps and valves, it can handle most chemicals except strong acid, strong alkali, and a strong oxidizer. Especially for the condition of middle temperature, high pressure, high speed, and where contamination is not permitted. -
Aramid PTFE Braided Packing is braided from quality Aramid(Kevlar)yarns, which are uniformly impregnated with PTFE dispersion. The braided packing shows good chemical resistance, high elasticity, and very low cold flow. It is wear-resistant but may damage the shaft if not used properly. The aramid fiber can be braided in many types for different applications, such as Aramid PTFE Packing with lubricant for a slurry service application, Spun aramid fiber packing with economical use; PTFE packing with Aramid corner, Graphite PTFE Packing with Aramid Corner, GPTFE & Aramid in Zebra braided packing, etc. -
Carbonized fiber packing is braided from oxidized PAN fiber impregnated with PTFE, silicon-oil-free. Compared with traditional carbonized fiber packing, it is not brittle and suitable for high peripheral speed applications. With the high strength and good thermal conductivity of the PAN fiber, and excellent self-lubrication of the PTFE, the packing has a long life and does not damage shafts. The related carbon fiber packing for a different purpose is available, such as Carbonized fiber packing with graphite, Carbonized Fiber Packing Reinforced with Nickel wire, Carbon fiber packing. -
Ceramic Fiber Cloth is a woven fabric made of our high quality ceramic fiber yarns. It can be used for high temperature applications up to1000° C. The cloth is reinforced with fiberglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperatures and does not affect the insulation property. -
Ceramic fiber braided packing rope is made from high-quality ceramic fiber, it has excellent capabilities of high strength and high-temperature resistance. Ceramic fiber is a standout among the different organic and inorganic fibers as an ideal replacement of asbestos, it has excellent capabilities of high strength and high-temperature resistance. Ceramic Fiber Packing can be impregnated with graphite or insert with steel wire -
Ceramic fiber rope includes three types: twisted, round braided and square braided. All are made of our high-quality ceramic fiber yarns. They can be used for high-temperature applications up to 1000° C. The rope is reinforced with fibreglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperatures and does not affect the insulation property. -
Ceramic Fiber Tape is a woven tape made of our high-quality ceramic fiber yarns. It can be used for high-temperature applications up to 1000°C. The tape is reinforced with fibreglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperatures and does not affect the insulation property. -
The corrugated metal gaskets can be direct replacements for spiral wound gaskets. It can eliminate inward buckling issues while creating a seal at moderate flange stresses. Corrugated metal is covered with graphite, ceramic, or PTFE layer. An additional finishing layer is applied depending on the requirements of the medium to be sealed. The gaskets with a soft layer on both sides are used in low-pressure applications in large diameter flue gas ducts at high temperatures -
Expanded Graphite packing is braided from low-sulfur expanded graphite yarns reinforced by cotton, glass fiber, etc. It has very low friction, and does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticity. Expanded graphite packing can be reinforced with Inconel wire, SS wire, nickel wire, and other metal materials to improve mechanical strength. -
Expanded PTFE Gasket is made by expanding PTFE; it is expanded through a unique process into a microstructure that enhances its compressibility, flexibility, and resistance to harsh conditions. It is suitable for use in steel flanges and flanges where a highly compressible gasket is required. And it's also ideal for sealing flanges with irregular surfaces. It will not exhibit the cold flow problems associated with virgin PTFE or the hardness problems of some other filled PTFE products. With the feature of excellent sealability, cuts easily, and separates cleanly from flanges after use, the flexibility of the expanded PTFE gasket's unique material allows it to fit any flange shape. -
Expanded PTFE joint sealant is a new soft seal tape product made of 100% PTFE, developed using a highly specific treatment on the PTFE Fluorocarbon material. It excels in sealing flange connections, especially those with surface irregularities commonly found in glass-lined or plastic-lined equipment. The Seal tape is a form-in-place gasket with its exceptional performance characteristics, pure material composition, and versatility, serving as an ideal sealing solution across various industries. Its adaptability and ease of use contribute to its pivotal role in diverse applications, making it a reliable choice for sealing requirements in different industrial settings. The ePTFE Joint Sealant Tape comes with a backing adhesive on one side, which allows custom on-site cutting and shaping without the need for pre-cutting or prefabrication. -
Expanded PTFE Sheets are made from 100% virgin PTFE resins. A special process produces a uniform and highly fibrillated microstructure with many fibers running in multiple directions. It is a food-approved product and has excellent resistance to a wide range of chemicals, making it a popular sealing material in the food, drink, and pharmaceutical industries. It also has excellent sealability, cuts easily, and separates cleanly from flanges after use. -
The Expanded PTFE Valve Stem Packing provides absolute reliability, chemical resistance, and the lowest total cost of ownership. It is an economical alternative to a sheet gasket for large equipment flanges. The regular sizes include the diameters of 6,8,10,12,14mm, length can be 20m, 25m, 30m, 50m,100m, etc -
Graphite sheet is selected from the high purity flake graphite. They can be reinforced by metal mesh, foil, or tanged metal. They are made through chemical treatment, expanded under high temperature, and then rolling. It offers excellent sealing capabilities under extreme conditions with a longer life and less maintenance. -
Fibreglass cloth is woven by continuous texturized glass fibre yarns, including C-glass and E-glass. Its woven styles include plain-woven and twill woven, according to different applications and requirements. It feels soft, smooth and compact. The surface can be foiled with aluminium or treated with silicon, vermiculite and PTFE, etc. -
Glass fiber packing is ideal organic and inorganic fiber as a replacement of asbestos. It is braided from E-glass fiber impregnated with PTFE. The packing has many excellent characteristics such as high strength, high-temperature resistance, low density, low thermal conductivity, good insulation, and non-ignitibility, etc. Glass fiber packing without any impregnation and Glass fiber packing impregnated with graphite are also available. -
Glass fiber rope includes glass fiber square rope, twisted glass fiber rope, glass fiber round rope, graphite glass fiber round rope, glass fiber round rope with rubber, glass fiber lagging rope, glass fiber knitted rope, glass fiber knitted rope with graphite, glass fiber sleeving etc. -
Glass fiber tape includes glass fiber tape with aluminium, glass fiber tape with silicone rubber, glass fiber ladder tape, glass fiber tadpole tape, glass fiber tadpole tape with graphite, etc types -
Graphite PTFE (GFO) braided packing, also known as Black PTFE Packing, is a high-performance sealing material made from braided PTFE yarn uniformly embedded with graphite particles. Its versatility and reliability make it an excellent choice for demanding sealing applications. and it is designed to provide exceptional sealing performance in demanding industrial applications. -
Graphite PTFE Packing with Aramid Fiber Corner is a high-performance composite sealing material. It utilizes PTFE-impregnated aramid fibers as corner reinforcement, combined with high-quality graphite PTFE(black PTFE) yarn as the main sealing body, processed through a specialized braiding technique. This structure retains the high strength of aramid fibers while integrating the low friction, corrosion resistance, and excellent thermal conductivity of graphite PTFE, making it ideal for dynamic sealing in high-speed, high-pressure, and highly corrosive conditions -
Graphite tape(coil) cut from the pure graphite rolls by a special machine tool, is mainly used for filler of spiral wound gaskets, die-formed graphite rings, flexible graphite cord, etc -
Kammprofile gasket consists of a concentrically serrated solid metal core with a soft conformable sealing layer bonded to each face. The layer can be expanded graphite, ptfe, asbesots free gasket sheeting material or some soft metal. It features excellent compressibility and good recovery characteristics. The gasket mainly suits for vacuum and extremely high pressure applications. It can an be refurbished and reused and has better leak tightness than spiral wound gaskets. -
Kynol Fiber Packing Braided (also called GOLDEN ARAMID Packing) is a high-performance sealing material made from Kynol (Novilid or Phenolic) fibers and impregnated with PTFE lubricant. This material combines excellent mechanical properties, flexibility, and strength, making it suitable for various industrial applications. -
Metal Jacketed Gasket is a thin metallic outer jacket that encloses a compressible, flexible filler. The metal case protects the filler from pressure, temperature, and corrosion while allowing the gasket to tolerate minor flange irregularities. The Metal Jacketed Gaskets are made in many styles to suit the most demanding applications: Single-Jacketed – Jacket covers one sealing face plus ID/OD. Double-Jacketed – Two-piece jacket fully encloses ID, OD, and both sealing faces. Use: heat exchangers, corrosive or higher-temperature service. French Type Jacketed– Jacket folded around a soft core with exposed filler at the edge; economical. Double Jacketed Corrugated – Corrugated metal element used as filler or as a solid corrugated core to increase resiliency. Single Jacketed Overlap– Enhanced jacket integrity and leak resistance on the periphery. Pass/Partition Bars – Integral or welded ribs (preferred for best seal). Any layout available.
